Helping you live a more sustainable life
It is currently Fri Sep 10, 2010 1:28 am

All times are UTC [ DST ]




Post new topic Reply to topic  [ 33 posts ]  Go to page Previous  1, 2
Author Message
 Post subject: Re: Mouldy walls, again...
PostPosted: Mon Jan 25, 2010 7:47 pm 
Offline
Mature Oak
User avatar

Joined: Tue Sep 23, 2008 1:09 pm
Posts: 798
Location: Pwllheli
Pompey Paul wrote:

Well, it's a bit like using plastic bottles to make insulation. Ultimately the paints and fillers create a market that makes coal use more acceptable. I don't think that is a good idea.




Or that you accept that even without a market the bottles (or coal power stations) will still be used so its better to deal with the problem than stick your head in the sand & wish they would stop.


Top
 Profile  
 
 Post subject: Re: Mouldy walls, again...
PostPosted: Mon Jan 25, 2010 7:51 pm 
Offline
Established Chestnut
User avatar

Joined: Mon Nov 02, 2009 7:46 pm
Posts: 296
Location: Under The Desk
As i stated in my post, buy a Dehumidifier. B&Q sell one for £80. Approx 180w to run. You can leave it on constant or on Humidity settings. I left mine on constant for some time and now i use the Humidity settings to control when it come on or not. Also, buy one of these:

http://www.safetots.co.uk/866.htm


Top
 Profile  
 
 Post subject: Re: Mouldy walls, again...
PostPosted: Mon Jan 25, 2010 7:59 pm 
Offline
Mature Oak

Joined: Sun Oct 25, 2009 10:08 pm
Posts: 936
Location: France 49
We are in an area of all buildings made from solid limestone. There are dehumidifiers for sale here that are plastic boxes about the size of 1.5 shoe boxes. They do not use electricity but you do have to change the cartridge. They are not expensive and seem to dry out cold wet walls well. Normal life here (no damp courses and porous rock)!


Top
 Profile  
 
 Post subject: Re: Mouldy walls, again...
PostPosted: Mon Jan 25, 2010 11:37 pm 
Offline
Established Chestnut

Joined: Sat Jul 11, 2009 2:27 pm
Posts: 481
Location: Hampshire, UK
justme wrote:
Pompey Paul wrote:

Well, it's a bit like using plastic bottles to make insulation. Ultimately the paints and fillers create a market that makes coal use more acceptable. I don't think that is a good idea.




Or that you accept that even without a market the bottles (or coal power stations) will still be used so its better to deal with the problem than stick your head in the sand & wish they would stop.


I did reply to this, but decided to delete my reply, because it is going off topic.

I suggest that if you want to discuss fossil fuel use and markets for the byproducts, you start a discussion in another category.


Top
 Profile  
 
 Post subject: Re: Mouldy walls, again...
PostPosted: Tue Jan 26, 2010 12:17 am 
Offline
Mature Oak
User avatar

Joined: Tue Sep 23, 2008 1:09 pm
Posts: 798
Location: Pwllheli
Pompey Paul wrote:

I suggest that if you want to discuss fossil fuel use and markets for the byproducts, you start a discussion in another category.



Nah not that interested (I do enough personally already to lower fossil fuel use), after all you brought it up.

Justme


Top
 Profile  
 
 Post subject: Re: Mouldy walls, again...
PostPosted: Tue Jan 26, 2010 8:32 am 
Offline
Moderator
User avatar

Joined: Tue May 23, 2006 9:16 pm
Posts: 1107
Location: South Notts
Aaaaaanyway, back to the original topic, we've decided to try a dehumidifier, so will report back if we see any difference! Thanks for all the advice folks xx


Top
 Profile  
 
 Post subject: Re: Mouldy walls, again...
PostPosted: Tue Jan 26, 2010 10:04 am 
Offline
Established Chestnut
User avatar

Joined: Mon Nov 02, 2009 7:46 pm
Posts: 296
Location: Under The Desk
You will see a massive improvement. Good luck.


Top
 Profile  
 
 Post subject: Re: Mouldy walls, again...
PostPosted: Mon Feb 08, 2010 10:07 am 
Offline
Established Chestnut
User avatar

Joined: Mon Nov 02, 2009 7:46 pm
Posts: 296
Location: Under The Desk
senseofjoy wrote:
Aaaaaanyway, back to the original topic, we've decided to try a dehumidifier, so will report back if we see any difference! Thanks for all the advice folks xx


Did you get a Dehumidifier and if so which one?


Top
 Profile  
 
 Post subject: Re: Mouldy walls, again...
PostPosted: Mon Feb 08, 2010 11:03 am 
Offline
Sycamore Standard

Joined: Sun Nov 22, 2009 7:28 pm
Posts: 106
Location: Sweden
We got one about 2 years ago to dry out the laundry room and the "kit room". As we have to dry indoors for about 6 months of the year, plus lots of wet kit coming in and out. Also, we had the beginings of a damp problem due to drainage issue at the back of the house (now fixed).

It pulls about 6-8 litres of water out of the air in a week, and its now on a low setting (about 1/3rd power or less). Only runs about 2 hours a day as well, as far as i've worked out (not in much detail) it costs us about 40-50 pence a week to run. But it did cost us more like £150 than £80. Will be switched off in april or may (once the washing can go outside).

Its not really an option to do anything else in our situation, increased ventilation will lead to frostbite and we already have central heating........

The one my inlaws have in the basement is either on, or off. Eats electricity, but cost them well under £100. Still gets about the same volume of water tho, even tho they have a much damper space to dry out.


Top
 Profile  
 
 Post subject: Re: Mouldy walls, again...
PostPosted: Mon Feb 08, 2010 6:20 pm 
Offline
Established Chestnut
User avatar

Joined: Mon Nov 02, 2009 7:46 pm
Posts: 296
Location: Under The Desk
mattr wrote:
We got one about 2 years ago to dry out the laundry room and the "kit room". As we have to dry indoors for about 6 months of the year, plus lots of wet kit coming in and out. Also, we had the beginings of a damp problem due to drainage issue at the back of the house (now fixed).

It pulls about 6-8 litres of water out of the air in a week, and its now on a low setting (about 1/3rd power or less). Only runs about 2 hours a day as well, as far as i've worked out (not in much detail) it costs us about 40-50 pence a week to run. But it did cost us more like £150 than £80. Will be switched off in april or may (once the washing can go outside).

Its not really an option to do anything else in our situation, increased ventilation will lead to frostbite and we already have central heating........

The one my inlaws have in the basement is either on, or off. Eats electricity, but cost them well under £100. Still gets about the same volume of water tho, even tho they have a much damper space to dry out.


What make / model is yours?


Top
 Profile  
 
 Post subject: Re: Mouldy walls, again...
PostPosted: Mon Feb 08, 2010 9:19 pm 
Offline
Sycamore Standard

Joined: Sun Nov 22, 2009 7:28 pm
Posts: 106
Location: Sweden
Koolpc wrote:
What make / model is yours?
Couldn't even tell you :D Its the local electrical supermarkets (elgiganten) own brand.


Top
 Profile  
 
 Post subject: Re: Mouldy walls, again...
PostPosted: Mon Feb 08, 2010 9:29 pm 
Offline
Established Chestnut
User avatar

Joined: Mon Nov 02, 2009 7:46 pm
Posts: 296
Location: Under The Desk
Picture?


Top
 Profile  
 
 Post subject: Re: Mouldy walls, again...
PostPosted: Mon Feb 08, 2010 9:37 pm 
Offline
Sycamore Standard

Joined: Sun Nov 22, 2009 7:28 pm
Posts: 106
Location: Sweden
Its an Appliance AP2012+

Edit:- It appears to have been discontinued


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 33 posts ]  Go to page Previous  1, 2

All times are UTC [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Jump to:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group